XTC180 Product Introduction
Powerful: Ultra-high speed, high torque multi-mode milling wheel drive system, equipped with dual spring pressure adaptive system, to meet the requirements of ultra-deep and high-load impact milling.
| Item | Unit | XTC180 |
|---|---|---|
| Grooving thickness | mm | 1000-2000 |
| Maximum grooving depth | m | 105(special 150) |
| Grooving single hole length | mm | 2800 |
| Maximum torque of milling wheel | KN·m | 2×180 |
| Milling wheel speed | r/min | 0-27 |
| Maximum lifting force of winch | KN | 120 |
| Maximum rope length | m/min | 66 |
| Wire rope diameter | φmm | 36 |
| Slag discharge method | – | pump lifting slag discharge |
| Host type | – | dedicated host |
| System pressure | MPa | 32 |
| Working radius | mm | 5300-5900 |
| Engine model | – | Carter C18+Carter CP |
| Rated power | KW/rpm | 571/2100/280 |
| Motor drive power | KW | / |
| Chassis | – | / |
| Track outer edge width | mm | 4550-6000 |
| Track shoe width | mm | 1000 |
| Maximum walking speed | km/h | 0.8 |
| Maximum climbing grade | ° | 30 |
| Minimum track ground clearance | mm | 509 |
| Working dimensions | m | 1600×6400×19500 |
| Maximum transport dimensions | m | 6000×3500×3400 |
| Weight | t | 205 |
